Mitel 8622 User Manual download pdf (Page 5)

Interoperability between Mitel IP Phones and ProCurve Switches

HP ProCurve Networking

4.2 Configure QoS on the switches

The recommended method is to have a dedicated VLAN for voice and configure the QoS parameters for the VLAN.

The L2 and DSCP policy advertised are based on the actual QoS configuration for the voice VLAN. By default these

values are:

• L2 priority 6

• DSCP 46, which corresponds to the Expedited Forwarding (EF) class

To modify the 802.1p or DSCP values:

Vlan <vid> qos priority <0-7> Sets the 802.1p priority for the VLAN

Vlan <vid> qos dscp-map <codepoint> priority <0-7>

No vlan <vid> qos Removes QoS for the VLAN

To view which DSCP and QoS values are configured:

Show qos vlan Shows DSCP and QoS values

show qos dscp-map

DSCP -> 802.1p priority mappings

DSCP policy 802.1p tag Policy name

------------- ----------- ------------------------------

000000 No-override

For more information on QoS settings on ProCurve switches, please refer to the following documents:

• For switch 3500yl: http://cdn.procurve.com/training/Manuals/3500-5400-6200-8200-ATG-Jan08-6-Qos.pdf

• For switch 2610-POE: http:/www.hp.com/rnd/support/manuals/2610.htm

5. LLDP-MED support

5.1 Configure LLDP-MED support on Mitel phone

Mitel phones support LLDP-MED since version 7.0 of the 3300 ICP. It is enabled by default.

5.2 Configure LLDP-MED on the switch

1. Defining a VLAN as voice VLAN enables LLDP-MED:

(conf)# vlan 70 voice Enables LLDP-MED

2. Then configure LLDP-MED. LLDP-MED must be configured on the switch to support MED TLVs, in particular

network policy and capabilities:

(conf)# lldp run

(conf)# lldp config <port> medTlvEnable network_policy

(conf)# lldp config <port> medTlvEnable capabilities

1 2 3 4 5 6 7 8 9 10 11

No comments

Mitel 8622 User Manual Page 5