Mitel SIP USER AND ADMINISTRATOR GUIDE 5330 Specifications download pdf (Page 48)

5320e/5330e/5340e SIP User and Administrator Guide

Using Your Phone with the Cordless Module and

Accessories

Cordless handsets and cordless headsets provide you with the capability to move around within

your own office or adjacent offices while using your phone.

These cordless devices connect to your IP phone through a Mitel Cordless Module, which

attaches to the back of the phone. There are two Cordless Module types available: Digital

Enhanced Cordless Telecommunications (DECT) and Bluetooth

. The DECT Cordless Module

works with the Mitel DECT Cordless Handset and the Mitel DECT Cordless Headset. The

Bluetooth Module works the Mitel Bluetooth Handset and most third-party Bluetooth headsets.

The Mitel Cordless Handsets (both DECT and Bluetooth) recharge in the handset cradle. The

Mitel Cordless Headset (DECT only) rests and recharges in a headset cradle that attaches to the

side of the phone.

The Cordless Devices Application (see page 55

) provides access to the configuration settings

and information screens that apply to the cordless module and accessories.

Note: The 5320e IP phone does not support the Cordless Modules.

Note: Since only one module type can be attached to the phone at any given time, you cannot, for

example, use a 5310 Conference Module when a Cordless Module is attached.

CAUTION: Attempting to remove the back plate on the phone to install a Cordless

Module before disconnecting the phone’s power supply may damage the phone. For

details on installing a Cordless Module, see the appropriate Cordless Module and

Accessories Installation Guide for Mitel 5320e/5330e/5340e SIP Phones included with

the module and available at Mitel OnLine.

- 42 -

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 62 63

No comments

Mitel SIP USER AND ADMINISTRATOR GUIDE 5330 Specifications Page 48