Mitel 5607 User's Guide Page 77

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 76
Troubleshooting
71
Troubleshooting
This section contains information on how to solve common operational problems and warnings
you may receive.
If you cannot resolve the issue contact your system administrator.
If others are experiencing similar problems there may be a system error.
Operational Problems
Error or Warning Messages - 5607
Fault Probable cause Action or comment
No display The battery level is low or the handset is
defective.
Charge the battery or contact the system
administrator.
No ringing The sound off icon is on, or the ringer
volume set to silent, or the handset is
defective.
Long press the Sound off key, increase the
volume, or contact system administrator.
Display shows Probable cause Action or comment
No access The network is in range but there are
no access rights.
Switch off the handset and then
switch it on again or contact your
system administrator.
No System. The handset
beeps once a minute
(during max 30 minutes)
with a low tone followed
by a high tone (if enabled,
the vibrator also follows
the beeps).
The handset is out of coverage or
handset is defective.
Stop the beep with the Sound off
key and go into range.
Note: When re-entering the
coverage area it can take a couple
of minutes before the handset
automatically registers with the
system.
or
contact the system administrator.
SERVICE required
options corrupt
Note: This display
message is only shown in
English.
The handset is defective. Select the reset option on the
middle soft key if available. If no
reset option is available or fault
does not resolve the issue the
handset needs repair.
SERVICE required
Invalid IPDI
Note: This display
message is only shown in
English.
Easy replacement procedure not
followed correctly or failure during
easy replacement procedure.
Send the handset for service.
Enter PIN code The handset’s lock is activated. Enter the required PIN code. If the
PIN code is lost enter a new one
via PDM or do a factory reset via
the PDM.
Page view 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 87 88

Comments to this Manuals

No comments