Mitel 4125 User's Guide download pdf (Page 7)

Using a Headset

Note: Your system administrator may have enabled full-time headset operation

on your telephone. Telephones with full-time headset operation enabled must be

operated only with headsets.

A headset can be used either in regular answer mode or with the Auto Answer

feature programmed.

Most headsets are installed using the same jack that the handset plugs into.

MITEL’s Headset with Feature Control Switch (PN 9132-800-500-NA) plugs into

the dedicated headset jack (the jack nearest the front of the set).

To Install a Headset (no feature control switch)

To install the headset for your use, perform the following tasks:

1. When the telephone is not in use, lift the handset from the cradle and

carefully turn the set upside down.

2. Unplug the handset cord where it connects to the telephone.

3. Plug in the headset cord in the same place.

4. Store your handset in a safe place.

To return to handset operation, perform the following tasks:

1. When the telephone is not in use, lift the handset from the cradle and

carefully turn the set upside down.

2. Unplug the headset cord where it connects to the telephone.

3. Plug in the handset cord in the same place.

4. Set the telephone upright and return the handset to the cradle.

5. Store your headset in a safe place.

1 2 3 4 5 6 7 8 9 10 11 12 ... 37 38

No comments

Mitel 4125 User's Guide Page 7