Mitel 5320e Specifications download pdf (Page 108)

102 Using the phone system

Final

You are no longer connected with the caller and your phone returns to the

idle state.

To retrieve a parked call, follow these steps:

1 From an idle phone, lift the handset. This will select the next available

Line Appearance. Select a memory key programmed with the Park/

Retrieve feature. The phone LCD screen displays:

2 Enter the required park location using the phone keypad.

The system connects you with the caller who was on hold at the park

location. The LCD screen now displays the caller's name (if known) or

number.

To cancel the retrieval of the parked call, replace the handset.

If you enter a park location where there is no caller on hold, the phone

LCD will briefly display "No Parked Call".

There are nine park locations available (1 through 9). If all park locations

are in use when you try to park a call, the phone LCD will briefly display

"Park Locations Full" and the call will be placed on hold.

If the call is left parked for 30 seconds, the phone of the person who

parked the call will beep and the phone's LCD will briefly display "Call

parked at: " with the park location number to remind you that the call that

you parked has not been retrieved.

Speaker on the 5304 phone

To use the speaker on your phone, select a Line Appearance key while the

handset is on-hook. Note that since there is no handsfree microphone, this

effectively mutes the call.

Park Location:

Robin Jones

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 173 174

No comments

Mitel 5320e Specifications Page 108