General Information Guide
Mitel Gigabit Ethernet Stand
The Gigabit Ethernet (GigE) Stand enables phones to operate in a 10/100/1000 Mbit/s Ethernet
(GigE) LAN environment and allows unconstrained Gigabit Ethernet bandwidth from the
network to desktops. The GigE Stand supports the IEEE 802.3af Power over Ethernet standard,
eliminating the need for a separate power supply to power the IP phone.
The GigE Stand attaches to the base of the IP phone and replaces the existing stand. It has
three ports:
• GigE LAN port (to connect to the Gigabit Switch)
• GigE PC port that allows a GigE-equipped PC to connect to the LAN via the stand
• 10/100 Mb Ethernet connection to the attached phone
Mitel IP DECT Stand
The IP DECT Stand is an accessory peripheral for the Mitel 5300 Series IP Phones. The IP
DECT Stand connects to the base of a Mitel 5312 / 5324 / 5320 / 5330 / 5340 or 5360 IP Phone
and acts as an IP DECT base station with SIP Gateway functionality. The IP DECT Stand
connects to the network through the PC port on the Mitel IP Phone. It supports up to eight 5610
DECT Handsets that act as SIP extensions. The IP DECT Stand
• Supports up to eight handsets / three simultaneous calls
• Is supported across a range of IP phones: 5312 / 5324 / 5320 / 5330 / 5340 / 5360 IP Phones
• Is configured using a web configuration interface
• Has a DECT-based design: DECT 6.0 cordless technology provides higher quality voice
transmission, density, and less interference
.
Figure 38: Accessories - Stands
Mitel IP Paging Unit
The Mitel IP Paging Unit is an optional module that provides overhead or loudspeaker paging
functionality. The IP Paging Unit is installed as a standalone or a wall-mounted unit. Two LEDs
5610 IP Dect Stand
Gigabit Ethernet Stand
Comments to this Manuals