Mitel 5606 User's Guide Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 49
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
About Your Phone
3
•LA: 1910 - 1930 MHz
Exposure to Radio Frequency Signals
This device complies with FCC SAR limit of 1.6 W/kg. The maximum SAR value measured
when used at the ear is 0.0081 W/kg. The telephone has also been tested when worn on the
body using belt clip, maximum measured SAR value in this configuration is 0.0255 W/kg.
Environmental Requirements
Only use the handset in temperatures between 0C to +40C (32F to 140F).
Avoid exposing the handset for direct sunlight or close to other heat sources.
Keep the handset away from excessive heat and moisture.
Do not expose the handset to open flame.
Keep the handset away from strong electromagnetic fields.
Chemical Resistance
The alpha and numeric characters printed on the exterior of the handset have been tested and
found resistant to chipping, fading or wearing off when the handset is treated with common
cleaners and disinfectants or perspiration. The following chemicals have shown no harmful
effect:
3% Hydrochloric Acid
M-alcohol (70% Methylated Ethanol)
60% Chlorhexidin 0.5mg/ml
Acetone can be damaging to the plastic casing of the handset and should not be used.
Icons and Text in the Display
The icons and text in the display indicate functions and settings to which you have access. The
display normally shows the owner ID and the system ID, for example “System A”. This indicates
that the handset is in contact with System A. The owner ID is manually set by the user.
Figure 1: Example of a display configuration in standby mode.
Figure 1.
Shows time and icons
User information: User defined
in stand-by mode
Info Doctor Jobs
Shows the Soft keys function:
User defined in stand-by mode
Alarm icons and
status information, i.e. current mode
13:22
System A
A Brown 4321
}
}
}
}
In charger
}
System information
004
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 48 49

Comments to this Manuals

No comments