Mitel 5320e Specifications download pdf (Page 34)

Mitel IP Phone Reference Guide

28 Using Phones

4. Enter a new 4-digit PIN.

5. Press OK.

? Save is displayed.

6. Press Yes.

Reset now? is displayed.

7. Press Yes

8. Press Back repeatedly until the handset resets.

9. For future reference, record the new PIN.

Configure the SIP Domain

To configure the SIP domain, follow these steps:

1. Press the Volume up key on the side of the handset when it is in an idle state.

System Status display shows the MAC Address of the phone, the IP address of the

Gateway, Boot status (not accurate so ignore it) and IPEI.

2. Record the IPEI for the handset.

3. Enter the configured or DHCP assigned IP address into a web browser example:

http://xxx.xxx.xxx.xxx. Username and password are admin/admin.

4. Click VoIP Account 1 and then configure as follows:

• Server is local: Yes

• Display Name: Assigned Name for the User (There is a 19 character limit)

• Account: Enter the extension of the User

• Password: User’s PIN for that extension

• Account Name: Assigned User Name for the Account

• Account Mailbox Name: User’s Extension

• Account Mailbox Number: Feature activation code for Voicemail *98

• Registrar: Callp IP address

• Outbound Proxy: Callp IP address

• Authentication Username: User’s extension

• Server Port: default (5060)

• Outbound Proxy Port: default (5060)

• Registrar Config: Leave default

• Keep Alive: enabled

• DMTF Signaling: Set to RFC 2833

5. Leave the rest as default and click Save.

6. Click Telephony Settings from the menu on the left.

7. Under Destination for incoming call, choose which handset to forward incoming

calls to.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 130 131

No comments

Mitel 5320e Specifications Page 34