Mitel 5320e Specifications download pdf (Page 62)

Mitel IP Phone Reference Guide

56 Using Phone Features

Handsfree answerback

Using Handsfree answerback, you can have intercom calls automatically answered so

that you have a two-way speech connection. See Intercom to Co-worker.

Press Handsfree answerback to turn the feature on. Press the key a second time to

turn the feature off. The LED on the programmed key indicates when the Handsfree

answerback feature is turned on.

To be able to activate and deactivate this feature with a key, you must have a key

programmed with Handsfree answerback. See Programmable Memory Key Features.

You can also enable the feature without a key by checking the box for Handsfree

Answerback on your Personal Details page (see Change User Details).

Hold

Using Hold, you can put an active call on hold, and make other calls. The LED of the

Line Appearance key flashes to indicate the call is on hold.

To place a call on hold, follow these steps:

1. While on an active call, press Hold or another Line Appearance.

2. The indicator light next to the active Line Appearance changes from green to red

and/or flashes slowly.

3. To remove the call from hold, press (the original) Line Appearance.

Hold Notification

Hold Notification provides both audible and visible reminders that you have a call on

hold on MiNET phones. Reminders—audible "beep beeps" through the handset or

speakerphone and Call(s) on Hold splashed on the phone display—are sent when you

have one or more calls on hold.

The interval between reminders is configurable through the System Properties page.

To configure the Hold Notification Interval, follow these steps:

1. Click System Properties in the left menu.

2. Scroll down to Hold Notification Interval and enter a value in seconds.

The default value is 30 seconds.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 130 131

No comments

Mitel 5320e Specifications Page 62