LLDP and LLDP-MED Configuration Examples
To redefine these setting the full information must be entered:
To view the location configuration:
Additional Useful Commands
Further commands, details and settings can be found in the network switch installation and
configuration documentation, as supplied by the switch vendor. The above examples simply
illustrate how to start up an initial LLDP-MED configuration with ProCurve Networking switches,
to ease initial installations and moves, adds and changes.
To determine how a particular VLAN may be configured for QoS Policy Enforcement, the
following command can be used:
HP ProCurve Switch 5304XL(config)# lldp config a1-a4 medportlocation civic-addr CA 2 1 ON 3
Ottawa 4 Kanata 6 "Legget Drive"
Note: Spaces are used to separate the different fields, and so a name with an intended
space must be enclosed in “quotation marks”.
HP ProCurve Switch 5304XL(config)# show lldp config a1
LLDP Port Configuration Detail
Port : A1
AdminStatus [Tx_Rx] : Tx_Rx
NotificationEnabled [False] : False
Med Topology Trap Enabled [False] : False
Country Name : CA
What : 2
Ca-Type : 1
Ca-Length : 2
Ca-Value : ON
Ca-Type : 3
Ca-Length : 6
Ca-Value : Ottawa
Ca-Type : 4
Ca-Length : 6
Ca-Value : Kanata
Ca-Type : 6
Ca-Length : 6
Ca-Value : Legget Drive
HP ProCurve Switch 5304XL(config)# show qos vlan
VLAN priorities
VLAN ID Apply rule | DSCP Priority
------------- -------------- + -------- --------
1 No-override | No-override
Comments to this Manuals