Mitel 5560 IPT none Specifications download pdf (Page 53)

Typical Configurations

Compression

channels

64 192 G.729a compression is not a standard offering on base

systems. Additional DSP resources are needed to achieve

the values shown. Compression is added in block of 8

bi-directional channels on Quad DSP modules and DSP II

modules only.

T. 38 16

Record-a-Call 12 Every Record-a-Call session uses a conference resource and

a voice mail session from the available pool. The maximum

number of simultaneous sessions supported is 12, but may be

limited to less than this by the available resources.

CIM ports 4 (12) These ports may be used to connect ASU cabinets only. Up

to 2 Quad CIM cards can be installed to increase the number

of CIM ports.

Analog trunks 36 96

ASUs supported 4 (12) Additional ASU cabinets may be connected to the Quad CIM

cards.

LS trunks (in ASU) 22 (38) The internal ASU (AMB) has 6 LS trunks and up to four

Universal ASU cabinets may be added with 4 LS trunks each

(or four ASU II cabinets with 8 LS trunks each).

IP networking yes The system can support a maximum of 2000 programmed IP

trunks, but the number which can be used at any one time will

be limited by other resources.

MMC modules

(installed slots)

Echo Canceller (3,4,5,6)

Quad DSP (3,4,5,6)

DSP II (4,5,6)

Dual FIM (1,2,3,4)

T1/E1 (1,2,3,4)

Quad BRI (1,2,3,4)

Quad CIM (1,2,3,4)

The maximum number of usable framer and FIM modules

may be limited by the E2T capacity of the system, especially

in the base configuration (single processor).

Digital links 16 Digital trunks may be on embedded Quad BRI modules (12),

Dual T1/E1 modules (8), T1/E1 combo modules (4), or

external NSU cabinets (16).

Peripheral cabinets 6 (+6 expanded) The number of peripheral cabinets may be doubled by using

an expanded peripheral cabinet, but this will only increase the

line size and does not increase the traffic capacity.

NSU/DSU cabinets 8 To install the maximum number of NSUs and peripheral

cabinets at the same time will require chaining of the NSUs.

Note that the maximum usable capacity may be limited by the

E2T and DSP resources before the physical capacity is

reached.

Table 12: Maximum MXe configuration (continued)

Feature/Resource

Value/Quantity

Notes

Base MXe Expanded

Page 2 of 2

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 380 381

Comments to this Manuals

No comments

Mitel 5560 IPT none Specifications Page 53

Comments to this Manuals

Related products and manuals for IP phones Mitel 5560 IPT none