Mitel 5560 IPT none Specifications download pdf (Page 49)

Typical Configurations

CX/CXi Controller

Table 10: Maximum CX/CXi configuration

Feature/ Resource Value/Quantity Notes

RTC processor 266 MHz This processor is listed as 300 MHz in the Engineering Tool.

Memory (RAM) 512 MB

IP Users and

Devices (Including

SIP Users)

100 Up to 16 IP devices may be connected directly to the powered

Ethernet ports on the front of the CXi cabinet.

Maximum 100 IP users.

TDM Devices 150 ONS devices only. DNIC devices are not supported on the CX.

Total Devices 150

ACD users

(active agents)

50 To install the maximum number of ACD users will require the

maximum number of digital trunks and DSP resources.

Echo canceller

channels/

IP gateway (E2T)

10 (default)

64 (max)

Echo cancellation is done in one DSP for the basic system. The

addition of more DSP devices can add another 10 channels, and each

T1/E1 combo module provides 32 channels of hardware echo

cancellation. (See Table 20 on page 52 for complete details.)

Conference

channels

30 Conference channels in the CX are allocated based on the number of

available DSP devices at start-up. The base system will have 9

channels (e.g. three 3-party conferences) and larger systems will

have 30 channels. Each conference may have up to eight members,

but the total cannot exceed the allowed maximum.

Voice Mail 16 The maximum allowed number of voice mail ports is also fixed by the

number of DSP devices installed. The base system allows up to 4

ports and, with increased DSP resources, up to 16.

Compression

channels

64 G.729a compression is not a standard offering on base systems.

Additional DSP resources are needed to achieve the values shown.

Compression is added in blocks of 8 bi-directional channels on Quad

DSP and DSP II modules only.

T.38 16

Record-a-Call 8 Every Record-a-Call session uses a conference resource and a voice

mail session from the available pool. The maximum number of

simultaneous sessions supported is 8, but may be limited to less than

this by the available resources.

CIM ports 3 One Quad CIM card can be installed, but only the first 3 ports will be

functional.

ASUs supported 3 Up to 3 external ASU and ASU II cabinets can be installed.

LS trunks (in ASU) 36 Up to 12 on internal AMB/AOB, and 24 in external ASU.

IP networking yes The system can support a maximum of 2000 programmed IP trunks,

but the number which can be used at any one time will be limited by

other resources.

Page 1 of 2

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 380 381

Comments to this Manuals

No comments

Mitel 5560 IPT none Specifications Page 49

Comments to this Manuals

Related products and manuals for IP phones Mitel 5560 IPT none