Mitel 5560 IPT none Specifications download pdf (Page 64)

Engineering Guidelines

Provisioning System Resources

The table below shows the capacity of each system in its factory default configuration, with no

additional MMC modules or other upgrades purchased.

Notes:

1. No compression is possible in the base configurations.

2. The AX must have a 4GB flash card installed to support Voice Mail.

Table 19: Standard 3300 ICP Configurations

Feature/ Resource CX II MXe Standard LX AX MXe Server

IP users (note 1) 150 300 400 100 5000

TDM users (note 2) 150 96 96 192 0

ACD users 50 0 0 0 350

Echo canceller

channels/E2T

32 64 (128 max) 128 40 256

Compression channels 0 0 0 0 0

Conference channels 30 64 64 64 128

Voice Mail ports 16 30 30 0 0

CIM ports 0 4 4 0 0

ASU supported 0 4 4 0 0

LS trunks 6 6 0 48 0

IP networking (note 3) yes yes yes yes yes

Echo slot number 0 5 5 0 5, 6

Quad DSP slot number 0 0 7, 8 0 0

Dual FIM slot number 0 0 0 0 0

Digital links (T1/E1)

(see note 4)

00000

Peripheral cabinets 0 0 0 0 0

NSU/DSU cabinets 0 0 0 0 0

Notes:

1. This is the maximum number of IP users that can be installed without additional DSP resources.

2. This is the maximum number of DNIC and ONS users that can be installed without additional DSP resources.

DNIC users are only supported on MXe and LX systems.

3. The base system can support IP networking but not compression.

4. It is assumed that digital (or analog LS) trunks will be installed in or connected to the controller to access the

PSTN. BRI links should be considered a subset of T1/E1, with 8 voice channels per card (4 BRI links), instead

of 48 T1 or 60 E1 (2 T1/E1 links).

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 380 381

No comments

Mitel 5560 IPT none Specifications Page 64