Mitel 3100 User's Guide download pdf (Page 60)

Technician’s Handbook

3. Select either Standard or Cyclic.

If you have programmed more than one extension

group in the Ring Map form, you should set the Ring

Type to Cyclic.

4. Click Save.

Program external access (line and hunt groups)

To set up the outgoing lines, you need to program

• line groups

• hunt maps

• outgoing line access.

Assign lines to groups

1. Click Lines and then click Groups.

2. Select the line and click Change.

3. Select the line group that you want the line to belong

to. Only lines of identical type and mode can be

grouped together (that is, you can’t mix analog and

digital lines).

Each line can be assigned to only one line group.

By default all lines are in Line Group 1.

4. Select the line access type. On a system with only a

few lines, you would typically place all the lines in one

group and define the group with Both access.

5. Click Save.

Program the hunt maps

Hunt maps allow extensions to access lines. Hunt maps

define which line groups each extension can access. The

system “hunts” for an available line in the order that the

line groups are programmed into the extension’s Hunt

map.

3100 Hand.bk Page 52 Monday, August 19, 2002 8:49 PM

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 229 230

No comments

Mitel 3100 User's Guide Page 60