Configuring the IP Network
77
Configuring the
IP Network
Figure 9: Direct internet connection using WAN port
To connect directly to the Internet through a DSL or cable
modem
1. Connect a straight-through CAT 5 cable from the
WAN port on the controller to the modem.
2. Launch the system tool. See Launching the tools (p.
113).
3. Choose IP Networking from the Selection menu.
4. Click Router and then click WAN Ethernet.
5. Click Change.
6. Proceed to one of the following procedures
– Using Static IP addressing (p. 78)
– Using DHCP Client (p. 78)
– Using Broadband Access (PPPoE) (p. 79).
3100 Hand.bk Page 77 Monday, August 19, 2002 8:49 PM
Comments to this Manuals