Technician’s Handbook
54
2. Select the first extension, click Change and select
the required network response to a Direct Dial In
(DDI) call. The options are
– Queue: camp incoming calls on the extension
until answered
– Busy: send busy tone to calling party
– Redirect (default): redirect caller to attendant
3. Click Save.
4. Repeat the above steps for each extension.
Configure the Non-DDI BRI lines
You configure Non-Direct Dial-In (DDI) lines by using
Ring Maps (similar to LS/CLASS lines).
1. Click Lines and then click Digital Configuration.
2. Select the line and then click Change.
3. Set the line type to Not Direct Inward Line.
4. Click Save.
5. Click Lines and then click Ring Map.
6. Select the line and click Change.
7. Configure the Day and Night Entries for the line
8. Click Save.
9. Click Lines and then click Ring Map Type.
10. Select the line and click Change
11. Select either Standard or Cyclic.
If you have programmed more than one extension
group in the Ring Map form, set the Ring Type to
Cyclic.
12. Click Save.
13. Assign the lines to groups. See Assign lines to groups
(p. 52).
3100 Hand.bk Page 54 Monday, August 19, 2002 8:49 PM
Comments to this Manuals