Mitel 1000 guide Owner's Manual download pdf (Page 26)

Press the Speakerphone Key to finish programming.

To enter system programming

If your extension is the Programming Extension you have access to

the system programming options. If you select this option you will be

prompted to enter the System Programming Password. If this option

is selected from any other extension the display will show

‘Programming Refused’. Again, the default Programming extension

is extension 20.

From the Programming Extension, press the PROGRAM Key

Press the Scroll Down Key () until ‘System programming’ is

displayed.

Select ‘System programming’.

Enter the System Programming Password to access system

programming (1111 in default).

Desk Phone– Basic Call Features

Making and Answering Calls

Making an external call.

With AccessLine Digital Phone Service and the Mitel 1000 you have

the ability to use two kinds of phone lines. The service comes

equipped with 2 IP Trunks to place calls over. Optionally, you may

choose to plug in up to 2 CO Lines (traditional phone lines) that you

purchase from any phone company or already have.

Making an external call (using Automatic Line selection)

1. Press a Line Key to select a free line and when dial tone is

returned dial the external number.

2. Lift the handset, or use a Speakerphone Key, and dial the

number. The system automatically selects a free line and the

number is dialed.

Making an external call in Pre-dial mode

If you do not lift the handset you may enter digits in Pre-dial mode

by dialing the external number. Digits will not be sent to line until you

lift the handset, press the Speakerphone key, or select 'Dial' from

the display.

You can edit the number you have entered prior to sending to

the line, by using the left-hand Keypad ‘Edit Key’, located below

the keypad.

To make an internal call (with Automatic Line selection)

Select the ‘Internal Call’ option on the display and select the desired

extension from the list.

The display will show the extension number, or, if programmed, the

extension’s name.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 87 88

No comments

Mitel 1000 guide Owner's Manual Page 26