Mitel 1000 guide Owner's Manual download pdf (Page 63)

A Configuring Your Mitel 1000 via the Desk

Phone

To enter system programming

If your extension is the Programming Extension you have access to

the system programming options. If you select this option you will

be prompted to enter the System Programming Password (which is

1111 by default). If this option is selected from any other extension

the display will show ‘Programming Refused’. Again, the default

Programming Extension is extension 20.

From the Programming Extension, press the PROGRAM Key

Press the Scroll Down Key () until ‘System programming’ is

displayed.

Select ‘System programming’.

Enter the System Programming Password to access system

programming.

System Setup Options

Displaying caller numbers and routing calls

The Caller ID service is available on the phone lines. If you

subscribe to this service, your network sends the telephone number

of callers to the Mitel 1000 (provided the caller has not elected to

restrict the network from presenting their number). The telephone

number (and/ or an optional associated name) is displayed on the

ringing Desk Phones.

Your telephone number will also be presented to persons you call,

unless you restrict your number from being presented.

How a caller number is displayed at your extension

The caller’s number will appear on the display of all Desk Phones

programmed to ring for incoming calls.

If a name is associated with the number in either the system speed

dial store or the Caller ID store the name will be displayed.

A caller may choose to withhold their identity. In this case, the

display will show ‘Number Withheld’ instead of the caller’s number

or name.

If the number information is not available the display will show

‘Number Unavailable’ instead of the caller’s number or name.

If more than one caller is calling at any one time, the number

displayed will be that of the first call in the queue. When this call is

answered by one of the ringing Desk Phones the number of the

next call in the queue will appear on the displays of the other ringing

Desk Phones.

If your Desk Phone is not ringing for the call you may examine the

incoming call ID by selecting ‘Examine I/C Call’. The same

information shown on the ringing Desk Phones is then displayed.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 87 88

Comments to this Manuals

No comments

Mitel 1000 guide Owner's Manual Page 63

Comments to this Manuals

Related products and manuals for Telephones Mitel 1000 guide