Mitel 1000 guide Owner's Manual download pdf (Page 74)

Enter the System Programming Password and select ‘Extensions’.

Press the Scroll Down Key () until ‘Sys. Speed no. override’ is

displayed.

Select ‘Sys. speed no. override’

Select the extensions on which you wish to activate the feature.

Those extensions allowed to dial System Speed Dial numbers not

normally appropriate to their Class of Service are indicated by a ♦.

Press the Speakerphone Key to finish programming.

Note

Numbers in an extension’s Personal Speed Dial list cannot

override the Class of Service restriction of the extension

Using Voicemail

Voicemail

Voicemail common parameters

Up to 8 extensions can be allocated voice boxes.

The maximum number of messages that can be stored in a Mailbox

is 20 at power up. This number is programmable from 10 to 50

messages.

The maximum message and Greeting length is programmable

between 60-180 seconds. The time allocated at Power Up is 120

seconds.

Unretrieved messages are deleted in 15 days and retrieved

messages are deleted in 3 days.

An extension must be allocated a Voice Mailbox before it can use

voicemail. By default, each extension is allocated a Voice Mailbox.

To allocate a Voice Mailbox to an extension

From the Programming extension, press the PROGRAM Key

Press the Scroll Down Key () until ‘System programming’ is

displayed.

Select ‘System programming’.

Enter the System Programming Password and select ‘Extensions’.

Press the Scroll Down Key () until ‘Voice Mail Boxes’ is displayed.

Select ‘Voice Mail Boxes’

Enter the extensions to be allocated a Voice Mailbox. Those

allocated a box will be indicated by a ♦.

Press the Speakerphone Key to finish programming.

Remote Notification

Selecting the Extensions that can activate remote notification

In default no extension can set remote notification. Those

extensions that can set remote notification are programmed in

system programming.

From the Programming extension, press the PROGRAM key.

Press the Scroll Down key () until “System Programming” is

displayed.

Select “System Programming”.

Enter the System Programming Password and select “Extensions”.

Select “Remote Notification”.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 87 88

Comments to this Manuals

No comments

Mitel 1000 guide Owner's Manual Page 74

Comments to this Manuals

Related products and manuals for Telephones Mitel 1000 guide