Mitel 1000 guide Owner's Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
4
1 Introduction
Congratulations on purchasing the AccessLine Digital Phone
Service featuring the Mitel 1000 phone system. You will now be
able to share your phone connection between fixed & cordless
handsets and access the latest in ‘Voice over IP’ services while also
having the ability to use your existing phone lines.
This User Guide will show you how to setup and use connect Mitel
1000 phone system.
Conformance
This equipment is designed for use in the United States.
This equipment complies with the following standards:
FCC Part 15, Subparts B, C, D
FCC Part 68
UL60950
Analog extension ports: TNV3
CO port: TNV3
ADSL port: TNV3
Power fail port TNV3
LAN/WAN ports SELV
Important Safety instructions
The following safety information is reprinted from IEC60950.
When using your telephone equipment, basic safety
precautions should always be followed to reduce the risk of fire,
electric shock, and injury to persons, including the following:
Read and understand all instructions.
Follow all warnings and instructions marked on the product.
Unplug this product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
Do not use this product near water (for example, in a wet
basement).
Do not place this product on an unstable cart, stand, or table.
The product can fall, causing serious damage to the product.
Slots and openings in the cabinet and the back or bottom are
provided for ventilation, to protect it from overheating; these
openings must not be blocked or covered. This product should
never be placed near or over a radiator or heat register. This
product should not be placed in a built-in installation unless
proper ventilation is provided.
This product should be operated only from the type of power
source indicated in the manual. If you are not sure of the type of
power source to your building, consult your dealer or local
Power Company.
Page view 3
1 2 3 4 5 6 7 8 9 ... 87 88

Comments to this Manuals

No comments