Mitel 1000 guide Owner's Manual download pdf (Page 40)

Lift the handset and press either ‘Send digits’ or the Speakerphone

Key.

A line will be selected.

Dial the number you require.

To change your extension Lock Password

From the Idle Menu, press the Scroll Down Key () until ‘Extension

Lock’ is displayed.

Select ‘Extension Lock’.

Select ‘Change the lock code’.

Dial the existing 3-digit Lock Password. The default password is

123.

Dial your new 3-digit Lock Password. The new Lock Password will

not be displayed when entered.

Press the Speakerphone Key to finish programming.

To examine Extension Lock Passwords

For configuration via the Desk Phone interface, see page 66.

Alarm call

This feature enables you to set your extension to ring at a given

time.

To set your extension to give you a Alarm call at a given time

From the Idle Menu, press the Scroll Down Key () until ‘Alarm call’

is displayed.

Select ‘Alarm call’.

Enter the time in the 24-hour clock format, for example, 0930 for

9.30 am.

At the programmed time the extension will give ten rings. If not

answered, it will ring twice more at two-minute intervals and will then

cancel.

Alarm calls must be set daily and therefore cannot be set more than

24hrs ahead.

To review and cancel a Alarm call

To review an Alarm call, select ‘Alarm call’ and the time set will be

displayed. Select ‘Confirm’ to retain the programmed time. If you

wish to change the time, select ‘Change’ and enter a new time.

To cancel the alarm call, select ‘Change’ followed by ‘Confirm’.

Extension Reset

You can reset your extension to cancel all the following features if

they have been set:

Do Not Disturb

Call Forward

Call Back

Alarm call

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 87 88

No comments

Mitel 1000 guide Owner's Manual Page 40