Mitel 1000 guide Owner's Manual download pdf (Page 41)

To reset your Desk Phone

From the Idle Menu, press the Scroll Down Key () to scroll

downwards until ‘Reset the telephone’ is displayed.

Select ‘Reset the telephone’. The display shows ‘Extension reset’

momentarily before returning to the Idle Menu.

Incoming Call Handling

General

Calls can be presented to the Mitel 1000 on CO lines and IP lines.

Your AccessLine Digital Phone Service comes with two IP lines and

you can optionally add up to two more CO lines.

Calls can be programmed to ring any number of extensions.

For configuration via the Desk Phone interface, see page 67.

When calls are received on a line all free programmed extensions

are rung.

If the call is not answered it is forwarded to the Answering Machine

after the forward on no answer timer expires.

Note

The forward on no answer timer is set at 18 seconds in default.

This timer can be changed. See Page 84 to change it via the

programming Desk Phone.

Note

Any forwarding set on an extension is ignored for incoming calls

unless the calls are routed to the extension by Caller ID

programming or a caller has dialed through the Answering

Machine or a voice mail box. If a single phone is programmed to

answer calls on a line the forwarding on the phone is acted on. If

the phone has no forwarding set then the line forwarding is acted

on. If more than one phone is programmed the forwarding

options for the line are acted on.

Restricting Outgoing Calls

This feature lets you decide which lines each extension can access

for outgoing calls. By default, all extensions have access to all lines.

For configuration via the Desk Phone interface, see page 67.

Day/Night Service

The ‘Day Service’ / ‘Night Service’ feature allows you to change the

extensions which ring on incoming calls, change the Class of

Service at each extension, and change the voice greeting heard by

callers (if you have voicemail installed). These changes can take

place automatically, at pre-programmed times daily, or can be

invoked manually. Furthermore, the system can be programmed to

remain in ‘Night Service’ over the weekend.

For configuration via the Desk Phone interface, see page 69.

System Time/Date For configuration via the Desk Phone interface,

see page 70.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 87 88

Comments to this Manuals

No comments

Mitel 1000 guide Owner's Manual Page 41

Comments to this Manuals

Related products and manuals for Telephones Mitel 1000 guide