Mitel 1000 guide Owner's Manual download pdf (Page 67)

Select the extensions that are to be allowed to barge-in. The

extensions you select will have a “♦” displayed beside them.

The default is that no extensions are allowed to barge-in.

To Program extensions protected from “Barge-In”

From the Programming extension, press the PROGRAM key.

Press the Scroll Down key () until “System Programming” is

displayed.

Select “System Programming”.

Enter the System Programming Password and select “Extensions”.

Press the Scroll Down key () until “Barge-In” is displayed.

Select “Barge-In Protection”.

Select the extensions that are to be protected from barge-in. The

extensions you select will have a “♦” displayed beside them.

The default is that no extensions are protected.

To Program “Barge-In” with or without tone

From the Programming extension, press the PROGRAM key.

Press the Scroll Down key () until “System Programming” is

displayed.

Select “System Programming”.

Enter the System Programming Password and select “Extensions”.

Press the Scroll Down key () until “Barge-In” is displayed.

Select “Barge-In Tone”.

Select Barge-In tone on or off. The selection is indicated with a “♦”.

In default tone is provided when barge in is activated. This is a

single burst, which lasts for about a half a second.

Incoming Call Handling

This option is used to allocate extensions to answer incoming calls

on the lines.

Associating lines with extensions for Incoming Ringing

By associating lines with extensions you can have lines ringing

different extensions in Day and Night modes.

From the Programming Extension, press the PROGRAM Key

Press the Scroll Down Key () until ‘System programming’ is

displayed.

Select ‘System programming’.

Enter the System Programming Password and select 'Lines'

Select ‘Incoming Ringing’.

Select the CO line or IP Trunk.

Select ‘Day’ or Night’.

The extension menu is presented. Select the extensions that are

to ring for calls on the line. A solid diamond, ♦, indicates these

extensions.

When the Mitel 1000 is equipped with multiple lines and up to

four cordless phones are programmed to ring please ensure that

the same four cordless phones are programmed to ring for all

lines.

Restricting Outgoing Calls

This feature lets you decide which lines each extension can access

for outgoing calls. By default, all extensions have access to all lines.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 87 88

Comments to this Manuals

No comments

Mitel 1000 guide Owner's Manual Page 67

Comments to this Manuals

Related products and manuals for Telephones Mitel 1000 guide