Mitel 1000 guide Owner's Manual download pdf (Page 81)

Select either ‘Extension lock password’, or ‘Voicemail password’, or

‘System VM box’.

1. If you selected ‘Extension lock password’, the extension menu

will appear. Select an extension and its Extension Lock

Password will appear on the display.

2. If you selected ‘Voicemail password’, the extension menu will

appear. Select an extension and its Voicemail Password will

appear on the display.

3. If you selected ‘Answering machine’, the Answering machine

Password appears on the display.

Press the Speakerphone Key to finish programming.

To configure Line Key Lights

When a call is placed on System Hold, you can decide if the

associated Line Key Light is to flash or remain steady on all other

Desk Phones. The default setting is that the light flashes.

From the Programming Extension, press the PROGRAM Key

Press the Scroll Down Key () until ‘System programming’ is

displayed.

Select ‘System programming’.

Enter the System Programming Password and select ‘System’.

Press the Scroll Down Key () until ‘Line key light’ is displayed.

Select ‘Line key light’

Choose either ‘Light flashing on hold’ or ‘Light steady on hold’.

Press the Speakerphone Key to finish programming.

To prohibit trunk-to-trunk calls on an extension

You may prohibit individual extensions from activating External

Forward, External Transfer and External Conference. (These

features set up so-called trunk-to-trunk calls).

From the Programming Extension, press the PROGRAM Key

Press the Scroll Down Key () until ‘System programming’ is

displayed.

Select ‘System programming’.

Enter the System Programming Password and select ‘Extensions’.

Press the Scroll Down Key () until ‘External Forwarding’ is

displayed and select.

Select ‘No trunk-to-trunk calls’.

Select the extensions to be denied this feature. Those extensions

denied the feature are indicated by a ♦.

Press the Speakerphone Key to finish programming.

To Change ringing from 20 to 50 Hz

This option allows the ringing frequency to be changed from the

default 20Hz to 50 Hz on individual extensions.

From the Programming Extension, press the PROGRAM Key

Select ‘System programming’.

Enter the System Programming Password and select 'Extensions'.

Press the Scroll Down Key () until ‘20/50 Hz ringing' is displayed.

Select '20/50 Hz ringing'.

Select the extensions to ring at 50 Hz

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 87 88

Comments to this Manuals

No comments

Mitel 1000 guide Owner's Manual Page 81

Comments to this Manuals

Related products and manuals for Telephones Mitel 1000 guide