Mitel 3100 User's Guide download pdf (Page 37)

Installation

Launching the tools

You can connect a PC or laptop to the 3100 ICP system

through

• a LAN drop

• the Ethernet port on the back of the IP Phone

• directly to a layer-2 switch port on the Mitel Networks

3100 ICP controller or expansion unit.

You must configure the PC to accept an IP address from

the 3100 ICP system. See Configuring the PC (p. 26).

You can also access the 3100 ICP system remotely by

dialing into the Mitel Networks 3100 ICP system through

a trunk (using the installed V.90 modem) or through the

Internet. See Using a remote access session (p. 131) for

more details.

To launch a tool

1. Launch your browser and go to the following URL:

http://192.168.1.2

2. Enter your username and password

Password: mnet (default)

3. Click

– Group Administration Tool

– System Tool, or

– System Quick Installation Tool

4. Proceed to Programming the voice parameters (p.

50).

You can only have one system tool session or one Telnet

tool session open at any time. The system quick

installation tool is only used during the initial

configuration of the system.

3100 Hand.bk Page 29 Monday, August 19, 2002 8:49 PM

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 229 230

No comments

Mitel 3100 User's Guide Page 37