Mitel 1000 guide Owner's Manual download pdf (Page 13)

Connecting your Existing Phone Line

You may connect up to 2 existing phone lines (called CO lines) into

the Mitel 1000. This is generally done when you first receive the

system and are in the process of porting the phone number on that

line to AccessLine. This way, you can continue to use that phone

number and phone line with the Mitel 1000 until the number has

been ported.

To do so, plug the phone line (s) into the line socket(s) labeled CO

Line 1 and CO Line 2 on the back of the unit.

• Press and hold down the ‘Page’ button on the base unit for 4

seconds. This button is located on the front of the unit. This

places the system in registration mode for 30 seconds.

• Select ‘REG’ on the Cordless phone.

• Press OK for ‘REGISTER’

• Enter 1234 as the PIN.

• The phone will register to the unit as Handset 1 (extension

number 31).

• You can register more than one handset in the 30 seconds

that the system is in registration mode. The sets are

automatically allocated a handset number (1-4) and use

extension numbers (31-34).

Cabling Desk Phones

The Desk Phones can be connected directly to the system using the

included telephone cord. If you wish to locate the phone further

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 87 88

No comments

Mitel 1000 guide Owner's Manual Page 13