Mitel 1000 guide Owner's Manual Page 53

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 52
53
1. Press The display shows the current volume level. Press
to adjust the volume.
Using Mute on a call
During a call, if you wish to speak to someone privately without
having the caller hear your conversation,
Press MUTE. The caller cannot hear you, but you can hear the
caller.
Press UNMUTE to communicate with your caller again.
Message Waiting Indication
A message indication symbol appears on your Digital
Cordless phone and a broken dial tone is heard when going off
hook, when a message has been left in the Answering Machine or
the extension’s voicemail.
To access the message press and dial
*
.
To access the answering machine dial 0 as the extension number.
The default password is 1111 for all mailboxes.
Switch on/off your phone
To switch off the power of your phone press and hold during
standby.
To switch on the power of your phone press . The battery icon
will display in 10 seconds. If the battery level is too low, the handset
may not power up.
To set your handset’s clock
Your clock resets to 12:00AM or 00:00, depending on time format
you are using, each time you replace the batteries
or switch off the phone.
To set your clock:
1. Press MENU during standby.
2. Press to select DISPLAY, and then press OK.
3. Press to select CLOCK, and then press OK.
4. Press to change the HOUR, and then press
5. Press to change the MINUTE.
If you set the time format of your clock to 12 hours, go to step 6. If
you set it to 24 hours, go to step 7.
6. Press. Press to select AM/PM.
7. Press OK to confirm.
Set the clock to 12 or 24 hour format
To change your phone’s time format:
1. Press MENU.
2. Press to select DISPLAY. Press OK.
3. Press to select TIME FORMAT. Press OK.
4. Press to select 12 HOURS or 24 HOURS.
5. Press OK to confirm.
Page view 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 87 88

Comments to this Manuals

No comments