Mitel 50005070 Instruction Manual download pdf (Page 157)

100

101

147

Basic Programming

Programming IP Sockets for Hotel/ Motel

terminals and ACD Monitor

1. Form 03, COS Define

- Select the COS number.

- Enable the following COS Options:

901 - DTRX Herald

904 - DTRX Complete Message Text

906 - Data SMDR - Does Not Apply

259 - Message Sending (for PMS only)

2. Form 29, DTE Profile

- Select a DTE profile number. You will use this profile number in

Form 12 - Data Assignment.

- Select the SEL. Option Subform.

- Enable: DTRX Echoplex, Editing, and Edit Character = 127.

3. Form 11, Data Circuit Descriptor

- Select a Circuit Descriptor (CDN).

Match the CDN values to those of the selected Terminal. For

example, All Baud Rates = 9600, Parity = None, Character Length

= 8, and Stop Bits = 1.

4. Form 12, Data Assignment

- Program a SOCKET type data device to an available PLID in the

following range:

PLID Port PLID Port

1/13/20 61320 1/13/25 61325

1/13/21 61321 1/13/26 61326

1/13/22 61322 1/13/27 61327

1/13/23 61323 1/13/28 61328

1/13/24 61324

Note: Hotel/Motel front desk terminals, ACD Monitors and other applications

that are not IP-enabled, and that require bi-directional data, must use an

RS232-to-IP serial port converter, such as the Precidia Technologies

Ether232 or iPocket232 (available from the vendor or its resellers), to connect

to the SX-200 ICP. A dataset connection to a DNIC port or an RS-232 serial

port on the SX-200 ICP controller will not work.

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 415 416

Comments to this Manuals

No comments

Mitel 50005070 Instruction Manual Page 157

Comments to this Manuals