Mitel 50005070 Instruction Manual download pdf (Page 31)

100

101

Basic Installation

Before you begin

A successful installation of the SX-200 ICP MX depends on careful

planning, especially when integrating the system into an existing data

network.For detailed planning information, see the Engineering Guidelines

in the Documentation folder on the SX-200 ICP software CD-ROM.

Appendix B of the Handbook provides a summary of the Guidelines.

Quick Installation

You can quickly install a system configured with Business Option 1 if your

installation does not require any purchasable MOSS Options or optional

controller hardware.

If you are adding MOSS Options, complete the installation by enabling the

options in CDE Form 04, System Options/System Timers. For more

information, see, “Enabling MOSS Options” on page 88.

If you have optional controller hardware to install, follow the procedure on

page 30.

To install a basic system:

1. Mount the controller.

2. Connect the ground lug at the back of the controller to a ground

connection.

3. Connect the hardware:

- Connect an Ethernet Switch to the Controller’s Ethernet port with a

Cat 5 cable.

- Connect the IP phones to the Ethernet Switch ports using Cat 5 cable.

CAUTION:Only experienced network administrators should

integrate the SX-200 ICP MX into a customer's LAN.

Note: Premier Business systems use the Premier database which must be

installed before enabling the MOSS Options. For more information, see

“Installing an Alternate Database” on page 201.

Note: The Ethernet port on the controller is auto-sensing, allowing you to

use either a crossover or a straight-through cable.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 415 416

Comments to this Manuals

No comments

Mitel 50005070 Instruction Manual Page 31

Comments to this Manuals