Mitel 50005070 Instruction Manual Page 71

  • Download
  • Add to my manuals
  • Print
  • Page
    / 416
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 70
61
Basic Installation
Peripheral Cabinet Configuration Rules
FIM Carrier Assignments
The SX-200 RM peripheral cabinet supports the Peripheral Interface
Module Carrier (FIM II or CIM)
The SX-200 RM peripheral cabinet supports the Peripheral FIM
Carrier II
The SX-200 LIGHT peripheral cabinet supports the Peripheral FIM
Carrier
T1 Trunk Card Configuration Rules
The system software supports up to two T1 links (includes T1 links
from T1/E1 modules and T1 cards) in any bay with a maximum of eight
T1 links in the system.
The MOSS System Option 96, Number of Links (0-8) monitors how
many T1 links (from T1/E1 modules) that the system will support. This
count includes T1 links from the T1/E1 modules on the PRI cards and
BCC III cards. The count does not include T1 links from the T1 cards.
PIC slot 5 must be left vacant when a T1 card is installed in slot 10 or
when Link 1 from a T1/E1 module on a BCC III is programmed.
PIC slot 6 must be left vacant when a T1 card is installed in slot 11 or
when Link 2 from a T1/E1 module on a BCC III is programmed.
Digital Line Card Configuration Rules for SX-200 RM Cabinets
Systems with BCC II cards have performance limits:
In high traffic configurations, keep the Digital Line Card (DLC) count to
a maximum of 7 per bay when using BCC II cards. If you have 8 DLCs
per bay, keep the device count to 84 or less. This will avoid slow
softkey response during peak traffic periods.
With 2 T1 cards in a bay, do not add more than 5 DLCs or 60 devices.
This avoids dial tone delays during peak traffic periods.
With 1 T1 card in a bay, do not add more than 6 DLCs or 72 devices.
This avoids dial tone delays during peak traffic periods.
Note: Do not insert T1 trunk cards into slots 5 or 6 of a peripheral cabinet.
Tip: A BCC III supports 8 DLCs per bay and is therefore ideal for high traffic
conditions.
Page view 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 415 416

Comments to this Manuals

No comments