Mitel 50005070 Instruction Manual download pdf (Page 44)

SX-200 ICP MX Technician’s Handbook

Installing Software Using an External

CompactFlash Card (Optional Initial Install)

The SX-200 ICP is shipped from the factory with the system software and

a default database installed. Perform this procedure only if you,

• are upgrading the system software on site

• are upgrading Release 2.0 or later software

• require a language other than the default English for voice mail prompts

or a second language for bilingual voice mail operation

• are replacing the internal CompactFlash or installing a hard drive for

systems equipped with internal CompactFlash. For replacement

instructions, see page 195

• are re-initializing the controller by re-installing the system software

To install software using an external CompactFlash card:

1. Launch the SX-200 ICP Installation program on the supplied

CD-ROM.

2. Select “Initial [CompactFlash Card] Installation”, and then click Next.

3. Select the voice mail language(s) that you want to install, and then

click Next The default is English and is not selectable.

4. Specify the drive letter of the CompactFlash Writer/Reader.

Note: Systems with Release 1.x software can only be upgraded on site using

a CompactFlash card. For more information, see “Upgrading the System

Software” on page 202.

Note: The “Initial” power-up and the reset in this procedure will each take 5

to 10 minutes.

Important: Use only Mitel-supplied CompactFlash cards. DO NOT

partition the card and DO NOT copy files to it before proceeding

with the software installation.

Note: The additional languages enable the embedded voice mail system to

operate with bilingual prompts. Bilingual prompts is a purchasable MOSS

option.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 415 416

No comments

Mitel 50005070 Instruction Manual Page 44