Mitel 50005070 Instruction Manual download pdf (Page 48)

100

101

SX-200 ICP MX Technician’s Handbook

To replace the cover:

1. Turn the controller until the back panel is facing forward.

2. Lift the lock for the AC power cord and place the cover at an angle to

hook onto the back of the unit.

3. Straighten and slide the cover forward as far as it will go.

4. Secure the cover by inserting and snugly securing the two screws on

the back panel.

5. Rotate the controller until the front panel is facing forward.

6. Secure the screws on the top of the unit.

7. Clip on the front face-plate taking care not to damage the protruding

FIM connectors.

8. Reinstall the controller on the wall or in the rack (if applicable).

9. Reconnect all cables.

Install the Analog Option Board (AOB)

1. Unplug the power cord from the controller.

2. Remove the cover and the front panel.

3. Remove the Stratum Clock Module (if installed).

4. Attach the standoffs as shown in the following figure.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 415 416

Comments to this Manuals

No comments

Mitel 50005070 Instruction Manual Page 48

Comments to this Manuals