8 Administering the phone system
Final
a Connect one end of an Ethernet cable to the network LAN jack and the
other to network icon connector of the power supply.
b Connect one end of an Ethernet cable to the phone icon connector on
your power supply and the other end to the network icon connector
on the phone.
c Plug the phone power pack into a power outlet.
2 If you also need to connect your computer to the LAN, connect an
Ethernet cable from your computer's network port to the phone port
marked PC.
3 If you have a Mitel 5330/5340, or 5224/5324 IP phone do the following. If
you have the Mitel 5212/5312 or 5304 IP phone, go to step 4:
a Wait for the Information Area display to show "Logged Out"
b Press the ACTIVATE softkey. The Information Area display will show:
c Enter your extension. If you have login/logout privileges, the
Information Area display will show:
d Enter your PIN.
e Press the ENTER softkey. The Information Area display will show:
where xxx is the extension of your phone.
4 If you have a Mitel 5212/5312 or 5304 IP phone do the following. If you do
not go to the next step:
a Wait for the phone to display the following (this may take 30 seconds
or more):
b To log into your phone, press *00 on the phone keypad. The display
will show:
Extension
Quit
PIN
Extension: xxx
Quit
Logged Out
*00
Extension
Comments to this Manuals