Mitel 50005070 Instruction Manual download pdf (Page 165)

100

101

155

Basic Programming

Programming SpectraLink Wireless

Telephones

Requirements

• SX-200 ICP Release 2.1 or later software and one IP device license

per Netlink phone.

• A properly configured and operational wireless LAN—includes

compatible 802.11b wireless access points and SpectraLink Voice

Priority Server (SVP).

Programming

SX-200 ICP

• In CDE Form 47, IP Networking, DHCP Options, Common Options

subform, program the following options:

• 3, Default Gateway IP address (default is 192.168.1.1)

• 66, SpectraLink firmware TFTP server IP address

(default is 192.168.1.2)

• 129, SX-200 ICP (RTC) IP address (default is 192.168.1.2)

• 130 - DHCP Server Identifier (default is MITEL IP PHONE)

• 151, SVP server IP address.

• Register the telephones with the SX-200 ICP either in CDE Form 09

(Desktop Device Assignments) or from the telephones by entering the

IP Set PIN Registration code and the desired directory number.

• Assign a Class of Service to each telephone in Form 09.

Notes:

1. Software for the SpectraLink telephones is provided on the

SX-200 ICP system software CD.

2. The push-to-talk feature of the NetLink i640 requires enabling

multicasting on the subnet used for the wireless telephones and

the SVP Server. Routers are typically configured with filters to

prevent multicast traffic from flowing outside of specific domains.

Where possible, the wireless LAN can be placed on a separate

VLAN or subnet to reduce the effects of broadcast and multicast

traffic from devices in other network segments.

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 415 416

Comments to this Manuals

No comments

Mitel 50005070 Instruction Manual Page 165

Comments to this Manuals