Mitel 50005070 Instruction Manual download pdf (Page 84)

100

101

SX-200 ICP MX Technician’s Handbook

Connecting Music on Hold, Paging

and Door Phone/Door Opener

Music-on-Hold (MOH) interface

The mini (1/8" - 3.5 mm) phono jack on the back panel of the SX-200 ICP

controller provides an interface to an external music source (radio, CD

player, etc.) for Music on Hold.

Input signals must be in the range of 10 to 100 mVrms. Any DC voltage

applied to the input must be less than 50 VDC.

CDE Programming

MOH requires no CDE programming in the default database. If a different

database is used, assign Music-on-Hold to PLID n/13/29/0 where “n” is the

IP Bay number (default 1) in Form 18.

Paging

The controller provides a single dedicated paging circuits for the

connection of customer-provided paging equipment. The equipment

connects to the DB-9 on the front of the controller. See Appendix C for

connector pinouts and relay states.

CDE Programming

The default database has programming for single zone paging to Zone 1,

which any station can access by dialing *12. No additional programming is

required.

If using a different database, complete the following programming:

1. In Form 18 (Miscellaneous System Ports), program a paging device.

2. Enable COS Option 303 (Paging Zone 1 Access) in the Class of Service

of each extension that requires access to the paging equipment.

Note: Powering down the SX-200 ICP redirects the MOH source to the paging

output. To stop the music from being heard over the pager, power down both

the MOH source and paging amplifier before powering down the controller.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 415 416

Comments to this Manuals

No comments

Mitel 50005070 Instruction Manual Page 84

Comments to this Manuals