Mitel 50005070 Instruction Manual download pdf (Page 135)

100

101

125

Basic Programming

6. Right-click your new connection icon and click Properties.

7. Click Configure. Ensure the fields are set as follows:

Data bits: 8

Parity: none

For a direct connection:

Maximum speed: 38400

Check: only connect at this speed.

Select wait for dial tone before dialing.

Select cancel the call time at 60 seconds.

Click Advanced and turn off error control and flow control.

For a remote connection:

- Stop bits: 1

- Click Advanced and turn on error control and select Compress data.

- Turn on flow control and select Hardware.

8. Click OK.

9. Select Server Types tab and make sure that PPP: Windows, Windows

NT3.5, Internet or PPP:Internet appears in the Type of Dial-Up Server field.

10. In the Advanced Options field, select Log onto Network and Enable

software compression.

11. Make sure that only TCP/IP is selected in the Allowed network

protocols field.

12. Select the Scripting tab and enter:

c:\program files\mitel\Imat\pridun.scp.

13. Click OK.

To create a Dial-Up Network connection on Windows 2000:

1. Click the Start button, select Programs, Accessories,

Communications, then Dial-Up Connections.

2. Double click Make New Connection, and then click Next.

Note: If you are creating a direct connection, make sure NT Direct Connection

is listed in the drop-down list in the Make a New Connection window.

Note: You may need to follow this procedure twice to create two Dial-up

Networking connections: one for on-site direct access, and one for remote

modem access.

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 415 416

Comments to this Manuals

No comments

Mitel 50005070 Instruction Manual Page 135

Comments to this Manuals