Mitel 50005070 Instruction Manual download pdf (Page 186)

100

101

176

SX-200 ICP MX Technician’s Handbook

DHCP Server Settings (Example)

The following settings must be programmed in the DHCP server:

Table 30 shows the DHCP settings programmed for this configuration.

See “Configuring a Windows 2000 DHCP server (prior to Release 4.0)” on

page 178 for information on programming SX-200 ICP DHCP settings on

a Windows 2000 DHCP server.

NOTE: In Release 4.0, DHCP Options 128 - 133 are replaced by Option 125

Ddefault for Mitel-specific options) and Option 43 (for Mitel- and non-Mitel-specific

options.) In this example, the ASCII data string in Option 125 would look like this:

id:ipphone.mitel.com;sw_tftp=20.20.20.1;call_srv=20.20.20.1;vlan=2;l2p=6

For information on programming the controller IP address and DHCP

settings, see page 178.

• DHCP IP Address Range

• Subnet Mask

• Option 03 (Router)

• Option 125 (ASCII configuration

string) (New for Release 4.0)

DHCP Options prior to Release 4.0

• Option 128 (TFTP Server

IP address)

• Option 129 (RTC IP)

• Option 130 (IP Phone DHCP Server)

• Option 132 (VLAN ID)

• Option 133 (Priority)

Table 30: DHCP Server Settings for Configuration 2 & 3 Examples

DHCP Server on VLAN 1

(IP: 10.10.10.2)

Setting Scope 1 Scope 2

DHCP 10.10.10.10 to 10.10.10.100 20.20.20.10 to 20.20.20.100

Subnet 255.255.255.0 255.255.255.0

Opt.03 10.10.10.251 20.20.20.251

Opt. 128 20.20.20.1 20.20.20.1

Opt. 129 20.20.20.1 20.20.20.1

Opt. 130 MITEL IP PHONE MITEL IP PHONE

Opt. 132 2 2

Opt. 133 6 6

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 415 416

Comments to this Manuals

No comments

Mitel 50005070 Instruction Manual Page 186

Comments to this Manuals