Mitel 50005070 Instruction Manual Page 206

  • Download
  • Add to my manuals
  • Print
  • Page
    / 416
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 205
196
SX-200 ICP MX Technician’s Handbook
6. Replace the cover.
7. Restore power to the controller.
8. Perform an Initial (CompactFlash Card) installation from the software
CD; see page 34 for instructions.
Replacing the Analog Main Board
1. Unplug the power cord from the controller.
2. Remove the top cover.
3. Remove the front panel.
4. Disconnect the three power supply connectors.
5. Remove the ribbon cable by flipping up the clip on the connectors at
each end of the cable as shown in the following figure.
Note: When prompted for a database, select Custom to install a backup of
the original database (if available).
Page view 205
1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 415 416

Comments to this Manuals

No comments