Mitel 50005070 Instruction Manual download pdf (Page 289)

100

101

279

Advanced Troubleshooting and Repair

- Press “v” repeatedly until the INPUT MASK prompt appears.

- Enter the same mask as set for your network— example,

255.255.255.000

- Press “v” repeatedly until the INPUT GATEWAY appears.

- Enter the IP address of your Gateway—example, 192.168.1.1

- Press “v” repeatedly until PERFORM PING TEST prompt appears.

- Press “#” to indicate Yes.

- At “INPUT DEST IP ADDRESS” enter the IP Address of the device

that you are proving a connection for (see following step). Example,

SX-200 ICP: 192.168.001.002.

- The phone will show: Pinging 1 to 5, and then show the results—

e.g., 5 Pings Successful; 0 Pings failed.

- The phone will have to be powered on and off in order to execute

another ping or boot up normally.

- PING the following devices (in order):

SX-200 ICP

3rd party DHCP if any

Local gateway.

Remote gateway

Remote IP.

Troubleshooting IP Phone Registration

To troubleshoot IP Phone Registration:

1. Record the error message on the IP Phone display, then go through

IP Phone Registration Troubleshooting.

2. If you cannot solve the problem using the IP Phone Registration

Troubleshooting Table, go through the General Troubleshooting Steps

on page 238.

Note: To rule out DHCP problems, and isolate network-related issues, we

recommend that you program the IP Phone with a static IP Address in Form

47 or from the phone itself; see page 285 for instructions.

1 2 ... 284 285 286 287 288 289 290 291 292 293 294 ... 415 416

Comments to this Manuals

No comments

Mitel 50005070 Instruction Manual Page 289

Comments to this Manuals