Mitel 50005070 Instruction Manual download pdf (Page 282)

100

101

272

SX-200 ICP MX Technician’s Handbook

3. Type the PMS message required to light a telephone’s message

waiting lamp, using CAPITAL letters only. See the following example.

4. Verify that the telephone’s message waiting lamp is lit.

If the lamp is not lit, check the PMS-related logs in Maintenance. The

logs will indicate which section of the PMS message is invalid.

5. Type the PMS message required to turn off the telephone’s message

waiting lamp.

6. Verify that the telephone’s message waiting lamp is off.

Turning a telephone’s message waiting lamp on and off from a PC

confirms that the SX-200 ICP PMS interface works correctly.

If problems continue when you reconnect the customer’s PMS computer,

check the maintenance logs for PMS related information, identifying

problems with the customer’s PMS hardware/software.

Note: For the PMS to light a lamp station the Dial 0 for that tenant must be

a console, and the Dial 0 must be the same for Night 1 and Night 2.

Note: Faster PMS PCs may have to be forced to wait for a reply.

space

xxxx

Start Trans-

action STX

(CTRL B)

End Trans-

action ETX

(CTRL C)

Function Code Status Code

1 = ON

0 = OFF

Station’s Extension (Room)

Number

Enter the telephone’s extension

number (5 digits with leading

spaces).

1 2 ... 277 278 279 280 281 282 283 284 285 286 287 ... 415 416

Comments to this Manuals

No comments

Mitel 50005070 Instruction Manual Page 282

Comments to this Manuals