Mitel 5201 Specifications download pdf (Page 13)

Administering the phone system 7Final

Quick start

for the

phone

system

This section describes how to get your phone system working with minimal

set up by using default settings.

To quickly set up your phone system using defaults, follow these steps:

1 Add permission profiles. See page “Permission profiles” on page 30..

2 Add users. See page “Add a user ” on page 12..

3 Add locations. See page “Add a location” on page 15..

4 Add an auto attendant. See page “Add auto attendant” on page 55..

5 Set up incoming call routing. See page “Incoming call routing” on

page 76..

6 Notify users. New users automatically receive their extension and PIN by

email if your business has been configured with this option. You may want

to also provide them with instructions for getting started.

Contact your service provider for information on how your business has

been configured for PIN notification. If you are not configured for PIN

notification by email, it is your responsibility to provide the users with their

extension and the PIN that was displayed when you added them.

7 Activate location phones. See page “Activate location phones” on

page 7..

Once your phone system is working, you can customize it to suit your

company’s needs. Refer to Customizing your phone system on page

“Customizing your phone system” on page 9..

Activate location phones

To activate location phones, log in each telephone that you have added at a

location and follow these steps.

The network icon connector is identified by the symbol.

Mitel IP phones

Activate the Mitel 5330/5340, 5224/5324, 5212/5312 and 5304 IP phones with

the following procedure:

1 Depending on whether your network is configured with Power Over

Ethernet (POE), do the one of the following:

• With POE—Connect the Ethernet cable to the network LAN jack and

to the network icon connector of the phone.

• Without POE

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 109 110

No comments

Mitel 5201 Specifications Page 13